Case erectors - Tray erectors(12)

The main function of a case erector machine is, as its name indicates, to form and fold a case giving it its final shape to be used as a container. Its functioning is very similar to the cartoners, the only difference is the size of the case. Unfolded cases are loaded into the cases warehouse, from where they will be picked up by means of suction cups, which will form the body of the case. The case is then folded and sealed with adhesive tape. The case is then brought into an outfeed conveyor belt and the case is ready to be filled. Not all companies decide to equip themselves with this type of machinery, as it is a job can be easily done by an operator. It is correct, however, to reflect on the fact that an operator takes an average of 20 seconds to form and close the lower part of a carton, while a forming machine, even of low speed, takes 7 seconds, therefore a third of the time. Having this type of machine certainly allows the company to reduce production costs and optimize the time allocated to this task. The tray erector machine also has the function of forming different types of trays, square, rectangular and special shapes. The tray erector works as follows: the pre-folded trays are taken from the warehouse and transported on adjustable guides. A mechanical pusher pushes the trays into a guide to give the trays the desired shape. Very often these machines are equipped with a glue dispenser device in order to to reinforce the closing with a glue drop. Once formed, the trays come out from an outfeed conveyor.

read more

Used TECO case erector

M1903133879
Visible
Good
TECO
-
2001
on request
More Info

Used SMI case erector

M1903133665
Visible
Good
SMI
-
2007
on request
More Info

Used COMARME GEM 8520 case erector

M1902949048
Visible
Good
COMARME
GEM 8520
2006
on request
More Info

Used Meca-système BMF05 tray erector

M1902947021
Visible
Good
Meca-système
BMF05
2007
on request
More Info

Used TECMA PACK FM 1500 CG case erector

M1902946917
Visible
Good
TECMA PACK
FM 1500 CG
2000
on request
More Info

Used Sermatec Vimco FAC113 tray erector

M1902946791
Visible
Good
Sermatec Vimco
FAC113
to be verified
on request
More Info

Used Breda Packaging TF30 tray erector

M1802789561
Visible
Good
Breda Packaging
TF30
to be verified
on request
More Info

Used Meca-système BMF 12 tray erector

M1802683053
Visible
Good
Meca-système
BMF 12
to be verified
on request
More Info

Used OK Superformer 1M-HM case erector

M1802618410
Visible
Good
OK Superformer
1M-HM
to be verified
on request
More Info

Used Interpac Waldner TS6030 tray sealer

M1802512543
Visible
Like new
Interpac Waldner
TS6030
2007
on request
More Info

Used Bedo Verpackungstechnik GmbH VA 1825 case erector

M1802506442
Visible
Good
Bedo Verpackungstechnik GmbH
VA 1825
1999
on request
More Info

Used OK Superformer 1 case erector

M1802308252
Visible
Good
OK
Superformer 1
to be verified
on request
More Info

Search

12

Do you want to sell used machines?

Publish your machine for free and find buyers worldwide

start selling

Description

The main function of a case erector machine is, as its name indicates, to form and fold a case giving it its final shape to be used as a container. Its functioning is very similar to the cartoners, the only difference is the size of the case. Unfolded cases are loaded into the cases warehouse, from where they will be picked up by means of suction cups, which will form the body of the case. The case is then folded and sealed with adhesive tape. The case is then brought into an outfeed conveyor belt and the case is ready to be filled. Not all companies decide to equip themselves with this type of machinery, as it is a job can be easily done by an operator. It is correct, however, to reflect on the fact that an operator takes an average of 20 seconds to form and close the lower part of a carton, while a forming machine, even of low speed, takes 7 seconds, therefore a third of the time. Having this type of machine certainly allows the company to reduce production costs and optimize the time allocated to this task. The tray erector machine also has the function of forming different types of trays, square, rectangular and special shapes. The tray erector works as follows: the pre-folded trays are taken from the warehouse and transported on adjustable guides. A mechanical pusher pushes the trays into a guide to give the trays the desired shape. Very often these machines are equipped with a glue dispenser device in order to to reinforce the closing with a glue drop. Once formed, the trays come out from an outfeed conveyor.